Fasteners are one of the indispensable parts in our work or life, and half hex rivet nut is also one of our common fasteners. So what are the misunderstandings in the use of half hex rivet nut?

The screw and the nut are used together. The screw is an external thread, and the nut is an internal thread. We know that the external thread of the screw is processed by threading. The efficiency is very high and the cost is very low. But how is the thread of the nut processed? The thread is internal, so it can't be rubbed by thread rolling, and it can't be rolled by thread rolling. The improper locking of screws and nuts is one of the misunderstandings.

After the screws and nuts are assembled, they should be locked with an anti-loosening device. When using a split pin to lock, the common mistake is to use a thin split lock or a half-piece split lock to lock; when using a spring washer to lock, the common mistake is that the gap of the washer opening is too small and loses elasticity; the lock is used to lock Yes, the common mistake is to lock the lock plate at the corners of the nut; the double nut is used to lock, the common mistake is to install the thinner nut on the outside and not tighten it tightly.

Of course, this error will also occur in the hex rivet nut .