When you see a " Laview camera offline " notification, it usually means that the camera has lost connection to one of either the Internet or the network. The reasons being WiFi signal interference, firmware-related glitches, a power outage, or router structural changes, etc. But most of these faults are quite easy to remedy.

Intermittent Reasons Behind Laview Camera Offline Issues:

·         Loss of WiFi Signal: The distance from the router is just right, or a wall is in between.

·         Router Modifications: In case you have recently altered your WiFi name or password, the camera will automatically not connect.

·         Power Interruption: Sudden loss of power will disconnect the camera.

·         Application or Firmware Bugs: If the software is not up to date, it may create disconnect error.

Quick Fixes for Laview Camera Offline:

1. Check Power Supply

Again, make sure both camera and router are powered. Unplug and replug the unit as a way of rebooting it.

2. Reboot Your Router

It's quite possible that the router is the culprit. Sometimes, a simple reboot can resolve issues related to connection.

3. Check Your WiFi Connection

Ensure that the camera is close to wifi signal strength. If it has recently been moved, try placing it closer to the router.

4. Firmware and App Updates

Make sure you have checked for firmware updates in the Laview app. The camera may go offline if either the firmware or the app is outdated.

5. Reconnect to WiFi

Reconnection is required if you have changed your router or password. Here's how to connect Laview camera to new WiFi :

·         Open the Laview app.

·         Select your camera.

·         Choose settings > Wifi settings.

·         Enter your new Wifi data and reconnect when prompted.

6. Factory Reset the Laview NVR or the Camera

When all else fails, consider factory resetting the Laview NVR or your standalone camera:

·         Hold down the reset button on your NVR or camera for 10 to 15 seconds.

·         Let the device reboot on its own.

·         Reconfigure your camera via the Laview app.

These steps will help you get your camera out of the offline state in no time and restore your security monitoring.