Take a passenger elevator as an example:

1. The passenger elevatoris equipped with landing doors, car running direction indicators, math display car, running position indicator and passenger elevatorcall button at each service landing. When using the passenger elevator call button, press the up direction button when going upstairs, and press the direction button when going downstairs. When the car arrives, the floor direction indicator shows the direction of movement of the car. Passengers judge the direction they want to go and enter the car after confirming that the passenger elevator is normal. Pay attention to the closing of the door leaf and do not stay at the docking place between the landing door and the car door.
2. There are position indicator, control panel, door open/close button and floor selection button in the car. After entering the car, press the floor selection button of the desired floor. If you want the car door to close immediately, you can push the door close button. The car floor position indicator shows that it has arrived at the floor and can leave after the car door is opened. The passenger elevatorhas a rated load of 13 people, and it cannot be overloaded. Please exit when people are overloaded.

3.When the passenger elevator is out of use, the driver should stop the car at the base station, turn off all the switches on the operating panel, and close the landing doors. In case of a power outage notice, the Passenger Elevator Factory should be stopped in advance.