If you observed the Orbi Ethernet not working, don't get into panic mode. Many users run into this while setting up Orbi or after changing the network. This might be due to a few main reasons. Luckily, there are easy few fixes.

1. Check the device and cable compatibility

Start by making sure that the Ethernet cable you are using is a good one. To exclude a faulty cable, change it. Also, verify that the device you are connecting is Ether-net capable on other networks.

2. Reset the connection and perform a power cycle

Sometimes, a power cycle will do magic. Unplug all the devices linked to your Orbi router. After about thirty minutes, plug everything back. Doing this might restore Ethernet capabilities and reset some internal settings.

3. Update the firmware

An old firmware can stop the Ethernet connections and other hardware features from operating. Use the Orbi app or type http://orbilogin.com into your browser to access the Orbi dashboard. Look for any updated versions and install them. Such an outdated system might cause Orbi Ethernet issues.

4. Incorrect Setup of Your Orbi

During Orbi router setup, the router's Ethernet ports might not come up immediately, especially if the router is still configuring or syncing poorly with the satellite. Ensure that all configurations are done just as specified and that the primary router is connected to your modem.

5. Consider an Entire Reset

Besides, if nothing of the above works, consider a factory reset Orbi router. Use a paperclip and press the reset button at the back of the router for about ten seconds. After that, it will require you to go through the Orbi setup process again, and of course, it will revert to factory settings.

It can get frustrating when Ethernet ports of your Orbi router do not work well. However, full functionality can most likely be restored through some troubleshooting.

If you have further questions about Orbi Ethernet not working, then you can go to our webpage.