Introduce The Fixing Method Of 1" Ratchet Buckle
The ratchet belt can be used in various environments according to different hooks. There are many sizes of ratchets, including the 1" ratchet buckle .
The conventional fixing method of a 1" ratchet buckle is strapping. The reason why strapping is not used is that although the strap can fix the ratchet buckle, the tightening force cannot meet the packaging requirements.
The ratchet buckle is a combination of a tightening belt, a fastener, and a metal end, and the fastener is a pull tension device.
When using a ratchet buckle, the tension of the shoulder strap cannot secure it firmly, and the shoulder strap may fall off during transportation. However, if the ratchet buckle is squeezed during transportation, the double-row hooks or metal handles of the metal fittings will squeeze the webbing, and the ratchet buckle will be scrapped.
The same is true when using a 2" ratchet buckle . No matter how big the specification is, you can first understand the basics when using it. china-tiedowns.com

How To Check The Quality Of Over Center Buckle
We can see the over center buckle in the transportation place, so how do we look at the quality of the over-center buckle?
Start with the surface treatment of the product: the product made by a good over-center buckle has a very smooth surface, and the surface treatment is very smooth. The products made by poor over-center buckle are bumpy even if several layers of surface treatment are applied because the surface treatment will not fill the surface defects of the product. Some will have small bubbles or yellowing and other problems. These are the performance of defective products.
Start from the edges and the inside of the product: Good products are produced with burrs so that the products will not be scratched or unsightly; no matter how good the mold is for a long time, the products will have burrs, so they need to be treated; Inferior products can be assembled directly without surface treatment, which can save a part of the cost, and it will be scratched or difficult to open.
The above are two ways to check the quality of the product. For more details, please visit cam buckle straps with hooks . china-tiedowns.com

Introduce How To Ratchet Buckle Works
We all know that a ratchet buckle is a device for reinforcing steel formwork and compressing wood boards, mainly for tensioning. Use the ratchet buckle to tighten, and then use the butterfly buckle to fasten it. The operation is simple, and the efficiency is more than ten times higher than other tightening methods. So ratchet buckle is very popular.
The ratchet buckle is light in weight, easy to use, soft and easy to bend, low tension, abrasion resistance, the long service life of raw materials, moisture resistance, and can prevent wind and frost from damage.
The working method of ratchet buckle is: firstly, by operating the handle of the belt pressing groove to remove the belt pressing groove, place the packing belt on the belt support, and control the belt pressing groove handle to close the belt pressing groove. This design can effectively prevent the packing belt from overflowing. , The packing strap is lined out to pack the goods, the packing strap of the packaged items is wound on the strap fixing slot, and the tightening handle is manipulated. The meshing of the tightening handle and the tensioning gear drives the strap fixing slot to rotate synchronously. The straps are tightened synchronously. After the tightening requirements are reached, the excess straps are placed at the cutting device, and the handle of the cutting device is manipulated to cut off the excess straps, and the straps are locked to complete the entire packaging process.
However, for us, the ratchet buckle is more for cargo tie down . www.china-tiedowns.com

About The Use Environment Of 1" Ratchet Buckle
The tensioner is also called a binding belt or a bolter, which is mainly composed of two parts: a fixed end and an adjustment end. Mainly used for fixing goods during transportation. It is simple and convenient to use by one person. The use of the tensioner starts with understanding. There are many sizes of tensioners, including a 1" ratchet buckle .
When we use the tensioner, we only need to effectively fix the fixed end and the adjustment end of the tensioner, then insert the webbing of the adjustment end of the binding belt into the metal handle of the fixing end, shake the handle vigorously, and adjust the binding force state.
The ambient temperature of the fastening tape is -40℃～+100℃. When the polypropylene fastening tape is used, the ambient temperature is generally -40℃～+80℃. It is strictly forbidden to use it in a high-temperature environment. The structure of the tie-down device is various. According to actual needs, the strength of the tie-down belt will decrease when the end parts are not exposed to ultraviolet radiation for a long time. Therefore, the tie-down belt should not be used for too long in a place with strong ultraviolet radiation. The bolter avoids working in molten metals, acids, glass plates, fragile objects, nuclear reactors, and special environments.
No matter what size the tensioner is 2" ratchet buckle or 1" ratchet buckle, the material used is the same, so you still need to pay attention to environmental issues. www.china-tiedowns.com