Introduction
A hot oil boiler refers to a boiler that is heated by hot oil. Generally, coal, oil, and steam are used as fuel, and hot oil is used as a medium. The hot oil circulating oil pump is used to force the medium to perform liquid phase circulation, and the heat energy is transferred to the heat equipment. Return to the furnace for reheating, with high operating temperatures at low pressures and high precision control of media operation.
Features
1) The hot oil boiler is a direct-flow special boiler developed based on the design thinking of forced circulation.
2) Closed cycle heating, open to the atmosphere, can extend the service life of the boiler, heat transfer in the liquid phase, heat loss is small, energy saving effect is remarkable, and environmental protection effect is good.
3) The hot oil boiler adopts the three-circuit coil design. This DC structure determines the safety that the traditional boiler does not have.
4) Due to the coiled structure, the heated surface is sufficient to provide high thermal efficiency.
5) The hot oil boiler is characterized by countercurrent heat exchange, and the temperature difference between the combustion exhaust gas temperature and the heat transfer oil outlet is below 30 °C.
6) The excellent structure of the hot oil boiler is mainly operated at a lower pressure, and the operating temperature below 450 °C is obtained, which has the characteristics of low pressure and high temperature.
Advantages
1) It has the characteristics of low pressure, high temperature, safety, high efficiency and energy saving.
2) With complete operation control and safety monitoring device, the operating temperature can be precisely controlled.
3) Reasonable structure, complete support, short installation period, convenient operation and maintenance, and convenient boiler layout.
4) Because the electric heating organic heat carrier furnace adopts advanced explosion-proof structure, it can be applied to the explosion-proof of Zone II of the factory, and the explosion-proof grade can reach Grade C.China Fuel Boiler
website:http://www.jn-boiler.com/fuel-gas-boiler/fuel-boiler/
A hot oil boiler refers to a boiler that is heated by hot oil. Generally, coal, oil, and steam are used as fuel, and hot oil is used as a medium. The hot oil circulating oil pump is used to force the medium to perform liquid phase circulation, and the heat energy is transferred to the heat equipment. Return to the furnace for reheating, with high operating temperatures at low pressures and high precision control of media operation.
Features
1) The hot oil boiler is a direct-flow special boiler developed based on the design thinking of forced circulation.
2) Closed cycle heating, open to the atmosphere, can extend the service life of the boiler, heat transfer in the liquid phase, heat loss is small, energy saving effect is remarkable, and environmental protection effect is good.
3) The hot oil boiler adopts the three-circuit coil design. This DC structure determines the safety that the traditional boiler does not have.
4) Due to the coiled structure, the heated surface is sufficient to provide high thermal efficiency.
5) The hot oil boiler is characterized by countercurrent heat exchange, and the temperature difference between the combustion exhaust gas temperature and the heat transfer oil outlet is below 30 °C.
6) The excellent structure of the hot oil boiler is mainly operated at a lower pressure, and the operating temperature below 450 °C is obtained, which has the characteristics of low pressure and high temperature.
Advantages
1) It has the characteristics of low pressure, high temperature, safety, high efficiency and energy saving.
2) With complete operation control and safety monitoring device, the operating temperature can be precisely controlled.
3) Reasonable structure, complete support, short installation period, convenient operation and maintenance, and convenient boiler layout.
4) Because the electric heating organic heat carrier furnace adopts advanced explosion-proof structure, it can be applied to the explosion-proof of Zone II of the factory, and the explosion-proof grade can reach Grade C.China Fuel Boiler
website:http://www.jn-boiler.com/fuel-gas-boiler/fuel-boiler/
Introduction
A hot oil boiler refers to a boiler that is heated by hot oil. Generally, coal, oil, and steam are used as fuel, and hot oil is used as a medium. The hot oil circulating oil pump is used to force the medium to perform liquid phase circulation, and the heat energy is transferred to the heat equipment. Return to the furnace for reheating, with high operating temperatures at low pressures and high precision control of media operation.
Features
1) The hot oil boiler is a direct-flow special boiler developed based on the design thinking of forced circulation.
2) Closed cycle heating, open to the atmosphere, can extend the service life of the boiler, heat transfer in the liquid phase, heat loss is small, energy saving effect is remarkable, and environmental protection effect is good.
3) The hot oil boiler adopts the three-circuit coil design. This DC structure determines the safety that the traditional boiler does not have.
4) Due to the coiled structure, the heated surface is sufficient to provide high thermal efficiency.
5) The hot oil boiler is characterized by countercurrent heat exchange, and the temperature difference between the combustion exhaust gas temperature and the heat transfer oil outlet is below 30 °C.
6) The excellent structure of the hot oil boiler is mainly operated at a lower pressure, and the operating temperature below 450 °C is obtained, which has the characteristics of low pressure and high temperature.
Advantages
1) It has the characteristics of low pressure, high temperature, safety, high efficiency and energy saving.
2) With complete operation control and safety monitoring device, the operating temperature can be precisely controlled.
3) Reasonable structure, complete support, short installation period, convenient operation and maintenance, and convenient boiler layout.
4) Because the electric heating organic heat carrier furnace adopts advanced explosion-proof structure, it can be applied to the explosion-proof of Zone II of the factory, and the explosion-proof grade can reach Grade C.China Fuel Boiler
website:http://www.jn-boiler.com/fuel-gas-boiler/fuel-boiler/
0 Bình luận
0 Chia sẻ
3348 Lượt xem
English
العربية
Français
Español
Português
Deutsch
Türkçe
Nederlands
Italiano
Русский
Română
Português
Ελληνικά